Emergency repair of a Leaking Pipeline

Challenge - Emergency repair of a leaking pipeline- carrying chemicals, steam, gases etc.

Solution: Wrap the sealing tape around the leaking area

A strong  tape which bonds without adhesive. It is applied with tension by wrapping the tape around itself.
The bondage of Anagha IST on its own backing creates a water tight, permanent
sealing. No drying time is required. Its flexible material can be applied smoothly
on any kind of surface, including wet or warm, dirty or oily. Extreme conditions
can be used also for temporary applications leaving no residues after removal.
The tape can even be applied under water. It has an excellent resistance to
various chemical substances, oils, acids, solvents, salt water, UV radiation and
extreme temperatures. 

Instant repair made easy of leaking pressure pipes, hoses, connections,
exhaust systems (gases, hot and cold water, acids, liquid fuels, vapor).
• Pipes
• Irrigation systems
• Hoses
• Sprinkler systems

Instructions
1. Remove sharp edges from the surface that could damage the
tape under tension.
2. Remove the interleave .
3. Apply tape at maximum tension.
4. Wrap with 50% overlap.
5. Start wrapping next to the area to be sealed.
6. Wrap over the leak until the flow is stopped.
7. Then progressively expand the wrapped area, wrapping back
and forth. Continue until the total coverage is equal to the
diameter of the pipe, either side of the leak area.
8. Wrap a final layer with minimum tension.

Bibhas Agarwal

Anagha Engineers

bibhas.agarwal@anaghaengineers.in

Mobile - 91-9699892782

Web: www.anaghaengineers.in

Navi Mumbai, Maharashtra, India